How close are Thanos and Shrek in size?
Thanos measures 2.52 m (8.27 ft) from the ground up, and Shrek measures 2.33 m (7.64 ft) from the ground up. That puts Thanos at 1.08 times the height of Shrek: 19 cm (7.48 in) of difference, 8%. Put the other way round, Shrek covers 92% of Thanos on the axis both are judged on. Thanos and Shrek are both written in single metres, and the 8% between them is the whole of the difference.
| Object | Real size | Axis measured | What the figure covers |
|---|---|---|---|
| Thanos | 2.52 m 8.27 ft |
Height | Marvel |
| Shrek | 2.33 m 7.64 ft |
Height | Ground to highest point |
Both figures, Thanos and Shrek, come from the Size It Up measurement set, one real-world size and one measured axis per object, last checked in September 2026; outline provenance is listed on the sources page.
Why this one is hard to judge by eye
Both shapes fit in a single glance here, which is exactly why the 8% between Thanos and Shrek slips past: at this size the eye compares whole outlines, and the figures above compare one axis. A gap of 8% is invisible without a shared baseline: on the ground line above, Shrek stops 19 cm (7.48 in) short of Thanos.
What each figure covers
Thanos. The height is the film design for the character. The same figure has been drawn at wildly different sizes in print for sixty years.
Shrek. The height is an estimate drawn from how the character is framed beside others, since the films never state one. That makes it softer than a measured figure.
Thanos and Shrek are both quoted as a height, which is what makes the ratio above a like-for-like figure.
What else is about that size?
Measured the same way, Thanos at 2.52 m sits within a tenth of London Phone Box at 2.51 m, Grizzly Bear at 2.5 m and Ostrich at 2.4 m. Shrek at 2.33 m has Sulley at 2.29 m, Chewbacca at 2.28 m and Groot at 2.39 m for company, within a tenth. Swapping any of those in for Thanos would move its ratio to Shrek by less than 10%.